Language Selection:
  https://silkway-machine.en.alibaba.com/
HOME News About us Products Service Contact Us













Contact: Mr. Benny Wang

Mobile: 0086-18252102377

TEL: 0086-516-85908552

FAX: 0086-516-85908510

Email: silkwaymac@vip.sina.com

Skype:silkwaybenny






 
  |→ Earthmoving Machinery → Bulldozer

SD8
Requset a Quote



BULLDOZER SD8

SD8 is elevated sprocket, track-type bulldozer. Its undercarriage system is elastic suspended, elevated sprocket, hydraulic direct drive, and hydraulic controls. SD8 dozer can be equipped with S-blade, single shank ripper. Main structure uses high strength plate and is suitable for working in stony, worse earth condition. The cab is installed Rops device and comfortable seat.
Main specifitions
Operating weight(not including ripper) --------------------------------------------------------------------------------  4000㎏
Ripperweight----------------------------------------------------------------------------------------------------------------.4300㎏
Track ground contact length ---------------------------------------------------------------------------------------------3280mm
Ground pressure(without ripper) -----------------------------------------------------------------------------------------105 kPa
Track contact length------------------------------------------------------------------------------------------------------2200 mm
Gradeability-------------------------------------------------------------------------------------latitude30  °    transverse 25 °
Ground clearance------------------------------------------------------------------------------------------------------------485mm

Overall dimensions(L × W × H) ------------------------------------------ 8090 × 4172 × 3952(with single shank ripper)
Diesel engine specifications
Model -------------------------------------------------------------------------------------------------NTA855-C400 (BC Ⅲ )
Type---------------------------------water cooled, single line, four strokes, turbocharged, 6-cylinders, diameter 140mm
Rated speed---------------------------------------------------------------------------------------------------------------1900r/min
Flywheel power -------------------------------------------------------------------------------------------------246kw(335HP)
Torque storage coefficient-------------------------------------------------------------------------------------------------24.5%
Start mode----------------------------------------------------------------------------------------------------24v electric starting

Theory travel speed  (km/h)      
1st gear forward 0-3.9              1st gear backward 0-4.8
2nd gear forward 0-6.8             2nd gear backward 0-8.4
3rd gear forward 0-11.9            3rd gear backward 0-14.8
Dozing operating rate (moving distance 40m )      452m 3 /h

Torque converter
Power separating, hydraulic-mechanic drive, single stage torque converter is used in SD8 elevale sprocket bulldozer.
Transmission assembly
It integrates center drive, transmission and speed changing control valve into one component. It can be assembled or disassembled as assembly or as a part. It is very convenient to service. Transmission is multi-stage planetary drive to realize modular assembling and disassembling. Gear the shift can be changed among 1st gear, 2nd gear, 3rd gear forward or reverse rapidly, through multi-functional control valve.
Steering and braking clutch
Steering and braking clutch are adjustment-free, oil-type, multi-disc clutch. The braking clutch is pressed by spring, separated hydraulicly, constant meshed type. Steering clutch is hydraulic pressed, non-constant engaged clutch. Steering and braking acts simultaneously, operated manually to realize steering slowly, sharply and braking. The braking of entire machine can be realized through the pedal. Braking rod is designed to keep the undercarriage system in braking condition and guarantee the machine not to slip on slope when starting the engine.
Final drive
Final drive is two-stage planetary reduction gear mechanism. It is mounted at outside of steering and braking clutch. Combined sprocket segment is very convenient for assembling, disassembling and service.
Undercarriage system
SD8 dozer utilizes elastic-mounted undercarriage. The track is triangle shape. The sprocket is elevated. Through floating function of continuous auxiliary suspension device, the machine can travel near obstacle on the ground to improve travelling stability and comfortable of the driver. Ground contact area is increased. Performance of travelling and traction is raised.
R.o.p.s cab
The cab is hexagonal thin wall box-type structure. Glass is mounted at six sides with wide viewing range. Pulling and pushing glass is mounted at back side. Air conditioner can be installed according to the requirement of customer. The structure of Rops is rigid. It can protect the driver efficiently when the bulldozer is in special condition. Adjustable operator ’ s seat bias to right 15 ° and fuel tank, engine hood, track are tilting, the driver can has a good front and rear sighting range.
Implement hydraulic system
Implement hydraulic system can control lifting, lowering and tilting of the blade. It also can control the moving of ripper. It mainly consists of oil pump, cylinder, valve group, oil tank line and controlling parts. Implement pump is two group vane type pump. The main specification is as following:
Front pump           Displacement   129ml/r
                            Rated pressure   21MPa
                            Rated speed     2000r/min
Rear pump            Displacement    56ml/r                 
                            Rated pressure   21MPa
                            Rated speed     2000r/min
Rated operation pressure of blade lifting system    17.5MPa
Rated operation pressure of tilting system         18.3MPa
Hydraulic system of tractor
It is composed of oil pump, transmission control valve, steering and braking control valve, sequence valve, torque converter outlet relief valve, filler and oil line, etc. Main pump is three group gear pump. The main performance is as following:
Lubricating pump                
Rated displacement -----------------------------------------------------------------------------------------------------90    ml/r
 Rated pressure--------------------------------------------------------------------------------------------------------- 0.4    MPa
 Rated speed-----------------------------------------------------------------------------------------------------------2000   r/min
Working pump                  
Rated displacement-----------------------------------------------------------------------------------------------------115    ml/r
 Rated pressure--------------------------------------------------------------------------------------------------------- 3.1    MPa
Rated speed--------------------------------------------------------------------------------------------------------------------2000   r/min
Oil draining pump               
Rated displacement------------------------------------------------------------------------------------------------------------160    m/r   
Rated pressure--------------------------------------------------------------------------------------------------------0.5    MPa
Rated speed------------------------------------------------------------------------------------------------------------2000   r/min
Maintenance filling capacity
Fuel tank----------------------------------------------------------753L
Water tank and diesel engine cooling water-------------------125L
Camshaft case of diesel engine-----------------------------------47L
Bevel gear case hydraulic system of tractor--------------------167L
Final drive (one side) ----------------------------------------------23L
Rear seat buffer spring case (each side) -------------------------30L
Pivot lubricating------------------------------------------------------13L
Implement system oil tank ----------------------------------------- 89L
Blade
Type          Height         Width         Capacity
s-blade         1765mm       4172 mm        13.0 m 3
Ripper
Type                   single, adjustable hydraulic ripper
Rippering angle          45 °
Max. penetration      1150mm
Max. lifting height     830mm

Blade type

Ground contact length(A)

Overall Lenght(B)

Blade height(C)

Overall height(D)

Blade width(E)

Track center distance(F)

Penetrating length

Lifting height

Blade capacity

Straight tilting blade(s-blade)
(with ripper)

3280

8090

1765

3952

4172

2200

614

1288

13.0

Straight tilting blade(S-blade)
(with traction machanism)

3280

6755

1765

3952

4172

2200

614

1288

13

 


Note: All specifications on our website are subject to technical modifications without notice.

PRINT】 【CLOSE




Copyright © 2008 Xuzhou Silkway Machinery & Equipment Co., Ltd. All rights reserved. 360网站安全检测平台
TEL : 0086-516-85908552 18252102377   FAX : 0086-516-85908510   CONTACT:Ms.Jessica Li 苏ICP备09016226号   
ADD:F17, Hengmao Business Center, No. 6, Xi'an Road( N ), Xuzhou City, 221006,Jiangsu Province, P. R.China
Email:silkwaymac@vip.sina.com Skype:silkwayjessica Design:Xuzhou.net